What to Expect When Remodeling an Older Portland Home
Older Portland homes often hide things that affect a remodel's scope, schedule, and budget: lead paint, asbestos, old heating oil tanks, unbolted foundations, and sometimes historic review. None of these has to stop a project, but each is easier to handle when you plan for it from the start.
Lead paint (homes built before 1978)
Renovation in a pre-1978 home that disturbs painted surfaces must follow lead-safe work rules. Small jobs are exempt: disturbing 6 square feet or less of painted interior surface per room, or 20 square feet or less outside (Oregon Health Authority).
- In Oregon, a CCB-licensed contractor doing this work needs a Lead-Based Paint Renovation (LBPR) license.
- Before work starts, the contractor must give you EPA's Renovate Right booklet.
- You can check a contractor's lead license in the CCB license search.
Asbestos
Asbestos can be in older flooring, ceilings, insulation, and siding. Oregon DEQ says you should hire an accredited inspector to survey before a renovation, and treat suspect materials as asbestos until a lab confirms otherwise. For demolition of a residence built before 2004, a survey by an accredited inspector is required (Oregon DEQ).
- Friable asbestos (material that crumbles easily) must be removed by a DEQ-licensed abatement contractor before demolition.
- Non-friable material may be removed by a CCB-licensed contractor, who must notify DEQ.
- Homeowners may handle asbestos in their own primary residence under specific rules, but DEQ strongly recommends hiring a licensed contractor.
Ask any contractor when the survey will happen. Finding asbestos mid-project can pause work.
Heating oil tanks
Many older Portland homes were once heated with oil, and some still have a buried or basement tank. If a tank needs cleanup or decommissioning and you hire someone to do it, Oregon DEQ requires a licensed Heating Oil Tank Services Provider. Licensed providers can certify the work with DEQ (Oregon DEQ). DEQ's Heating Oil Tanks program is at 503-229-6170.
Seismic strengthening
The City of Portland notes that homes built before about 1960 were often never bolted to their foundations. Common strengthening work includes bolting the sill plate to the foundation and bracing cripple walls with plywood (Portland.gov).
- A building permit is required.
- Many one- and two-family homes can use the City's prescriptive plans, if the home has a continuous concrete perimeter foundation, short enough cripple walls, and no steep slope.
- Homes that don't fit those limits, or have masonry foundations, may need an engineer or architect.
- The City offers free 15-minute appointments with a residential code reviewer.
A remodel that opens up the basement or crawlspace can be a practical time to add this work.
Historic review
If your home is a designated landmark, or sits in a historic or conservation district, some changes need City review. Changes in a Historic District require Historic Resource Review. In a Conservation District, changes can skip that review if they meet clear design standards. Properties that are only "Documented Resources" aren't subject to historic preservation land-use rules (Portland.gov).
To check your property, search it on PortlandMaps or book a free 15-minute appointment with a City planner (Portland.gov).
Planning tips
- Ask for testing and surveys early, before design is final.
- Keep a contingency in your budget for conditions found after walls and floors are opened.
- Ask contractors how they handle lead, asbestos, and change orders, and get the answers in writing.
- Read How to Hire a Remodeler in Portland.
Sources checked November 3, 2026: Oregon Health Authority; Oregon DEQ, Asbestos for Homeowners; Oregon DEQ, Heating Oil Tanks; Portland.gov, Residential Seismic Strengthening; Portland.gov, Historic Resource Types; Portland.gov, Historic Resource Reviews. General information, not legal or engineering advice.