How to Hire an Electrician

To hire a good electrician in the Portland area, confirm the company holds both a CCB contractor license and an Oregon electrical contractor license, make sure it will pull the electrical permit, and get the price and scope in writing before work starts.

A row of white circuit breakers in a home electrical panel
Photo: Mark Kats on Unsplash

Electrical work is one of the few home projects where the license rules are strict for good reason. In this guide, we'll walk you through the licenses to check in Oregon and Washington, which jobs need a permit, what to ask and what to watch out for.

Key takeaways

  • Oregon electrical contractors need a CCB license and a Building Codes Division (BCD) electrical license. Portland's permit application lists both.
  • New wiring, outlets, light fixtures and panel changes need an electrical permit in Portland.
  • Homeowners can only do their own electrical work if they own and live in the home.
  • In Washington, verify both the contractor and each electrician's certification with L&I.

Check the electrical license, not just the contractor license

An Oregon electrical contractor needs two licenses: a Construction Contractors Board (CCB) license and an electrical contractor license from the state Building Codes Division. The City of Portland's electrical permit application asks for both numbers.

Every company on our lists has an active license, but check it yourself before you sign anything. In Oregon, look up the company on the CCB license search. It shows whether the license is active and whether there are complaints.

Then confirm the electrical license on the BCD license search. A general handyman with only a CCB license can't legally do your electrical work.

In Washington, L&I licenses electrical contractors and certifies individual electricians, who must pass an exam. L&I recommends checking both the contractor and each electrician on its Verify tool before you hire.

Which Portland electrical jobs need a permit

In Portland, most work on hard-wired systems needs an electrical permit. These are the City of Portland's rules for one- and two-family homes (Portland.gov):

JobPermit needed?
New wiring, outlets or light fixturesYes
Changing a fuse box to a breaker panelYes
Low-voltage systemsYes
Baseboard heatersYes
Installing an air conditionerYes (electrical and mechanical)
Fixing an appliance cord or replacing a fuseNo
Replacing an existing applianceNo

In Washington, the contractor is responsible for buying the electrical permit and getting it inspected. Some cities issue their own electrical permits; elsewhere, permits come from L&I. Other Oregon cities set their own rules too, so check with your local building department.

Doing the work yourself

In Portland, homeowners can do their own electrical work only if they own and live in the home, and the owner on record is a person, not an LLC. You can't do your own electrical work on a rental, a home you're getting ready to sell or rent, or an accessory dwelling unit (Portland.gov). For anything else, hire a licensed electrical contractor.

Match the electrician to the job

  • Panel upgrades and EV chargers: Ask whether the price includes the permit, any utility coordination and patching walls afterward.
  • Older homes: Many older Portland-area homes still have knob-and-tube wiring or undersized panels. Look for a company that regularly rewires older houses.
  • Remodels: Ask whether the company works with general contractors and can schedule around other trades.
  • Emergencies: Ask whether someone will come out after hours, and what that costs.

Questions to ask before you hire

  • What are your CCB and BCD electrical license numbers?
  • Who will do the work, and are they licensed electricians?
  • Will you pull the permit and be there for the inspection?
  • Is the price fixed, or will it change if you find problems behind the walls?
  • What warranty do you give on your work?

What the written bid and contract should include

In Oregon, a written contract is required for any residential job over $2,000, and the contractor must give you three notices with it: a Consumer Protection Notice, a Notice of Procedure and an Information Notice to Owner about Construction Liens. The Oregon CCB recommends a written contract even for smaller jobs.

Before you sign, make sure the contract lists:

  • The company's name, address, phone and CCB license number
  • The scope of work, the price and the payment schedule, including any deposit
  • Specific products or model numbers, and any allowances (if an item costs more than the allowance, you pay the difference)
  • How change orders work. Changes should be in writing, signed by both of you, with the cost shown.
  • Warranty terms for both the work and the products

The CCB's guide to home improvement contracts also explains your right to cancel. You can generally cancel by written notice before midnight of the next business day, and you get three days if the company signed you up away from its place of business. Watch for any clause that waives your right to CCB mediation. You don't have to accept it.

In Washington, L&I recommends getting at least three written bids, checking references and signing a written contract you understand before work starts.

Red flags

  • No electrical license number, or a license that doesn't show up on the BCD search.
  • An offer to skip the permit. Unpermitted electrical work can cause problems when you sell.
  • A large cash payment before any work starts.
  • A firm price for rewiring or a panel upgrade without anyone looking at your house.

Find an electrician near you

We've researched licensed electricians in each city we cover, with ratings, years in business, hours and the warranties each company publishes. Start with the electrician lists, or jump to your city:

Frequently asked questions

Can I do my own electrical work in Portland?

Only if you own and live in the home. Portland doesn't allow homeowners to do their own electrical work on rentals, homes being sold or rented, or ADUs.

How do I check an electrician's license in Oregon?

Look up the company on the Oregon CCB license search, then confirm its electrical contractor license on the Building Codes Division license search. It needs both.

Do I need a permit to add an outlet?

Yes. In Portland, new outlets, wiring and light fixtures all need an electrical permit. Your electrician should pull it.

Who gets the electrical permit in Washington?

The electrical contractor. Washington L&I says the contractor is responsible for buying the permit and getting the work inspected.